Various lighting fixtures are often seen mounted on the walls of buildings to provide illumination and security. Such lights are commonly referred to as 'wall lights'. Wall lights refer to lighting fixtures installed on the exterior wall of buildings or on a vertical surface. For wall light, walkways, entrance and exit, building perimeter, parking gates, etc. It has multiple application areas such as Most wall lights are used for outdoor applications. Therefore, wall lights must be able to withstand harsh environments. The basic requirements for wall lights are to be resistant to water, corrosion, extreme high or low temperature and sunlight. We would like to share with you other tricks to use wall lights that meet these basic requirements more effectively;
-The key to lighting is to use minimal lighting fixtures to achieve proper lighting and comfortable lighting experience. Wall lights aim to provide higher visibility for pedestrians as well as ensure safety around buildings. There is no need to install wall lights in places where there is no pedestrian activity or security concerns. This will just be a waste of time and energy. More attention should be paid to places that absolutely need lighting, such as passages, entrances, exits. The distance of the wall lights is also important. If the luminaires are close to each other, the lighting may overlap partially or completely. Appropriate installation distance contributes to uniform and efficient lighting.
-Wall lights not only provide illumination, but also decorate buildings. Light sources with different color temperatures create multiple visual effects and different atmospheres. Unlike traditional light sources, it allows high-end LEDs to bring a range of associated color temperatures according to users' needs. In simple terms, what we call "warm white" or "cool white" refers to Correlated Color Temperature (CCT). White light allows pedestrians to concentrate more on their path, while warm white light makes them feel relaxed and relieve stress.
-Glare refers to visual conditions that cause visual disturbance and reduce vision due to improper brightness distribution of luminaires or excessive brightness contrast over time. Prolonged exposure to glare can cause visual fatigue. Glare in the eyes is very annoying because it often causes people to feel anxiety, lack of concentration and other psychological disturbances. It causes severe insomnia and headaches. Improper dispersions, such as uplight, will also intrude into the sky. Therefore, the absence of glare is very important to protect the pedestrian and the environment.
-One of the most effective ways to use wall light is with smart controls. When choosing controls, you should consider the specific needs of applications. In order to save energy and reduce your electricity bills, the use of this system in places where there is no security problem will give you an advantage. Remember, smart control saves you a lot of energy.
-The surroundings of the buildings are plunged into darkness when the power supply is suddenly cut off or there is a problem with the lighting fixture. Accidents are more likely to occur from a lack of visibility. The wall pack light should be equipped with an emergency battery to avoid the danger from power failure. The wall light with built-in battery will provide backup power for several hours, providing clear vision and a safer environment for pedestrians.